Charging

A low battery level is indicated by the green LED (Lg) flashing.

To charge the device, proceed as follows:

1. Remove the protective cap from the USB port (B) and swing it to the side.
2. Connect the ECCO+ to the supplied charger.
3. Plug the charger into the power (230V).

During the charging process, the red LED (Lr) lights up. If the device is switched on, additional LEDs may also light up.

As soon as the device is fully charged, the red LED goes out.

1. Disconnect the charger from the power.
2. Remove the charging cable from the device.
3. Cover the USB port again with the protective cap.